UAP 158 - The Challenge Mac OS
- See Full List On Dl.ubnt.com
- Uap 158 - The Challenge Mac Os Catalina
- Cached
- 802.11ac Dual-Radio Long Range Access Point
- Uap 158 - The Challenge Mac Os 11
UAP-AC-PRO Quick Start Guide. Linux, Mac OS X, or Microsoft Windows 7/8/10. (14 to 158° F) Operating Humidity 5 to 95% Noncondensing. The UAP-AC-M-PRO supports wireless adoption into your UniFi Wi-Fi network. This feature requires a currently managed UniFi AP operating with the following configuration: The UniFi AP must be running firmware 3.7.7 or newer.
Mounting Bracket |
Carriage Bolts (Qty. 4) |
Screws (Qty. 4) |
Gigabit PoE Adapter (48V, 0.5A)* |
* Included only in the single-pack of the UAP-AC-M-PRO
- 13 mm wrench (for pole mounting)
- Drill and 8 mm drill bit (for wall mounting)
- Phillips screwdriver (for wall mounting)
- Cable feed must be pointed downwards when mounted.
- Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
- Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP, one near the UAP-AC-M-PRO and the other at the entry point to the building. The ETH-SP will absorb power surges and safely discharge them into the ground.
IMPORTANT: The UAP-AC-M-PRO requires the UniFi Controller v5.4 or higher, available at: ui.com/download/unifi |
System Requirements
See Full List On Dl.ubnt.com
- Linux, Mac OS X, or Microsoft Windows 7/8/10
- Java Runtime Environment 1.6 (1.8 or newer recommended)
- Web Browser: Google Chrome (Other browsers may have limited functionality)
- UniFi Controller software v5.4 or newer (available at: ui.com/download/unifi)
Wireless Adoption Requirements
The UAP-AC-M-PRO supports wireless adoption into your UniFi Wi-Fi network. This feature requires a currently managed UniFi AP operating with the following configuration:
- The UniFi AP must be running firmware 3.7.7 or newer
- At least one SSID enabled and operating on 5 GHz band
- The UAP-AC-M-PRO must be within wireless range of the UniFi AP
LED
Ports
Secondary |
---|
The Secondary port is a Gigabit Ethernet port used for bridging. |
Reset |
The Reset button serves two functions for the UniFi AP:
|
Main |
The Main port is a Gigabit PoE port used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by one of the following:
|
Uap 158 - The Challenge Mac Os Catalina
The UAP-AC-M-PRO can be mounted on a pole or mast, or on a wall. Perform the steps for the appropriate installation.
Pole Mount
Wall Mount
Note: Secure the Mounting Bracket directly to a stud or other structurally stable surface using appropriate fasteners. |
Note: Screws shown not included. |
Cached
OR
See “Wireless Adoption Requirements” before proceeding.
- Ensure the UAP-AC-M-PRO is powered on, and then launch the UniFi Controller software.
- Go to the Devices page, and the UAP-AC-M-PRO will show up as Pending Approval (Wireless).
- Click Adopt.
802.11ac Dual-Radio Long Range Access Point
For information on configuring and using the UniFi Controller software, refer to the User Guide located on our website: ui.com/download/unifi
Uap 158 - The Challenge Mac Os 11
UAP-AC-M-PRO | |
Dimensions | 343.2 x 181.2 x 60.2 mm (13.51 x 7.13 x 2.37') |
---|---|
Weight | 633 g (1.40 lb) |
Networking Interface | (2) 10/100/1000 Ethernet Ports |
Buttons | Reset |
Power Method | 802.3af PoE |
Power Supply | 48V, 0.5A PoE Gigabit Adapter (Included) |
Mastering sublime text pdf download. Supported Voltage Range | 44VDC to 57VDC |
Max. Power Consumption | 9W |
Operating Frequency | 2.4 GHz 5 GHz |
Max. TX Power
|
|
MIMO
|
|
Antennas | (3) Dual-Band Internal |
Antenna Gain | 8 dBi |
Wi-Fi Standards | 802.11 a/b/g/n/ac |
Wireless Security | WEP, WPA-PSK, WPA |
BSSID Best video slots play. | Up to Four per Radio |
Mounting | Wall/Pole (Pole Kit Included) |
Operating Temperature | -40 to 70° C (-40 to 158° F) |
Operating Humidity | 5 - 95% Noncondensing |
Certifications | CE, FCC, IC |